Skip links

About us

Manufacture of machines for paper converting and corrugated cardboard processing.

Since 35 years we manufacture machine for paper converting and corrugated cardboard processing.
Company was born at the end of ’80 and realize, on his own patent, the AUTOMATIC FEEDER FOR DIE CUTTER to automate die-cutting of paper and corrugated cardboard on hand-fed platen die-cutting machines.
First models of machines were produced for small sizes and, gradually, for bigger sizes; with the introduction of LATERAL EXIT device, the complete automation of die-cutting on hand-fed platen was realized.

AUTOMATIC FEEDER FOR DIE CUTTER quickly meets a remarkable interest on the operators of paper converting industries and box factories. Since then, AUTOMATIC FEEDER FOR DIE CUTTER became the reference for small and medium die-cutting productions, from 64×88 to 150×200 cm.

Thanks to the collaboration with the most important manufacturers of hand-fed platen die-cutting from Italy, Spain and Asia, over the years the machine has been produced in a large number of units for European, American and Middle-eastern market.

At the same time, has been developed the device for HOT FOIL STAMPING with two or three dragging groups to install on plane-cylinder machines and platen die-cutters; linking of AUTOMATIC FEEDER FOR DIE CUTTER, properly adjust, also makes completely automatic the HOT FOIL STAMPING on hand-fed platen.

Production

Manual die-cutting is a repetitive operation completely controlled by the operator and this involves the interruption of the cycle of work through the timed working mode. Hence the production is strictly connected to operator skills and to the complexity of job.

AUTOMATIC FEEDER FOR DIE CUTTER allows to automate introduction and extraction operations of the sheets from hand-fed platen die-cutting machines through proper arms composed of vacuum suctions cups which introduced each sheet on the movable plane and extract it once the die-cutting is done.

The operator will just have the task to introduce the cardboard high stacks into the AUTOMATIC FEEDER FOR DIE CUTTER, manually or using the PRELOADING TROLLEY and make startup adjustments.

Die-cut sheets will be expelled in bundles on the top side of the AUTOMATIC FEEDER FOR DIE CUTTER and either manually taken by the operator (REAR EXIT version) or automatically  stacked and balanced on proper lift table (LATERAL EXIT version), significantly speeding up the operations of manual removal of waste and allowing an easy handling of die-cut stack.

AUTOMATIC FEEDER FOR DIE CUTTER is couplable to all of the brands of hand-fed die cutting machines, from size 64×88 to 150×200 cm and allows to work material from 150 gr/sqm to three waves corrugated cardboard depending on the size.

Why Zenari Engineering

Long experience in the field

Wide range of sizes

Service and technical support

Explore